pressures were steady at Low 50 and High 350. Vents were no better than 58-60F.
Daves Garage wrote:One thing Ive noticed since the first rebuild that makes me frustrated about this setup is that the lines into the front evaporator and out of the evaporator are pretty darn cold but I dont have an exact temp. They seem much colder than the air coming from the vents. The line out of the accumulator is really cold and its a short line from there to the compressor which the compressor is actually cold too after a few minutes. It does have the plastic cover on the accumulator and I noticed that near the hole where the low pressure switch threads on I could see ice on the accumulator. If the low side pressures were in a good range Id suspect something wrong with the blend door or max ac door but the heater has been completely shut off to the air box, I do hear a good difference in the air noise between max and recirc and Ive also checked the evaporator for debris.
Users browsing this forum: Bing [Bot], MSNbot Media and 7 guests